Nether Portal Spread
🔮 Spreads (nether) blocks to the overworld around nether portals in a configurable radius.
介绍
Nether portals spread (nether) blocks to the overworld around the portal in a configurable radius. By default you can stop the spread by placing four coal blocks within the portal’s radius. This can however be changed in the config. Players around the portal will receive a message when the spread effect begins and when it is prevented.
The mod saves all portal locations to ‘../world-folder/data/netherportalspread/portals/‘. A new portal is detected when it’s created or when a player goes from the nether to the overworld. So for old worlds you’ll have to go through it and back once to start the spread effect, or re-fire the portal. This makes it a lot more efficient than checking every block in the world for a portal.
All available config options:
Show Spoiler
sendMessageOnPortalCreation default true
When enabled, sends a message to players around the portal that the nether is spreading and that you can stop the spread with ‘preventSpreadBlockAmountNeeded’ of the ‘preventSpreadBlockString’ block.
messageOnPortalCreation default “You feel a corrupted energy coming from the portal. The nether will slowly spread into the overworld unless %preventSpreadBlockAmountNeeded% %preventSpreadBlockString% are placed within a %portalSpreadRadius% block radius around the portal.”
The message sent on portal creation.
sendMessageOnPreventSpreadBlocksFound default true
When enabled, sends a message to players around the portal that the nether spread has stopped when the portal detects new ‘preventSpreadBlockString’ blocks.
messageOnPreventSpreadBlocksFound default “With enough %preventSpreadBlockString% placed, you feel the corrupted energy fade.”
The message sent on preventspread blocks found.
sendMessageOnPortalBroken default true
When enabled, sends a message to players around the portal when it is broken.
messageOnPortalBroken default “With the nether portal broken, the corrupted energy is no longer able to enter the overworld.”
The message sent when a portal is broken.
prefixPortalCoordsInMessage default true
When enabled, shows the portal coordinates in portal messages.
portalSpreadRadius default 30, min 1, max 100
The radius around the portal to which the nether blocks can spread.
spreadDelayTicks default 40, min 1, max 72000
The delay in ticks in between the spread around the nether portal. 20 ticks = 1 second.
instantConvertAmount default 50, min 0, max 1000
The amount of blocks that are instantly converted to a nether block around a portal when it is detected. If there are existing nether blocks within the radius, their count is substracted from this number.
preventSpreadWithBlock default true
When enabled, blocks the spread effect when there are n (defined) prevent-spread-blocks (defined) within the radius.
preventSpreadBlockAmountNeeded default 4, min 1, max 100
The amount of prevent-spread-blocks (defined) needed within the radius of the nether portal to prevent spread.
preventSpreadBlockString default “minecraft:coal_block”
The block which prevents the nether portal from spreading. By default a coal block (minecraft:coal_block is the namespace ID).
By default, the mod will send a message to players around the portal when:
A portal is created, and the spread starts:
Portal spread is stopped with the preventspread blocks (defined in config):
The message when a portal is broken:
Configurable spread blocks
You can define which blocks should spread to what and the chance of it happening in the “spreadsettings.txt” file located in “./config/serilum/netherportalspread/“. By default it contains the following:
stone; [netherrack>10 + magma_block>2 + nether_quartz_ore>1],
grass_block; [netherrack>1],
dirt; [netherrack>1],
sand; [soul_sand>1],
gravel; [soul_sand>1],
stone_bricks; [nether_bricks>2 + red_nether_bricks>1],
sea_lantern; [glowstone>1],
farmland; [soul_sand>1],
wheat; [nether_wart>1]
The mod automatically adds “minecraft:” in front of the name values if it contains no “:” (colon).
The format is: FROMBLOCK; [TOBLOCK>WEIGHT (+ TOBLOCK>WEIGHT + TOBLOCK>WEIGHT) ]
The weight is automatically converted to chance values. This is calculated by: (1/total_weight)*weight.
So the default config file means:
Convert stone into 76.92% netherrack. 15.38% magma blocks and 7.7% quartz ore.
Convert grass blocks into 100% netherrack.
Convert dirt into 100% netherrack.
Convert sand into 100% soul sand.
Convert gravel into 100% soul sand.
Convert stone bricks into 66.67% nether bricks and 33.3% red nether bricks.
Convert sea lanterns into 100% glowstone.
Convert farmland into 100% soul sand.
Convert wheat into 100% netherwart.
Minecraft 1.16 and up has a different default config, using the new blocks:
Show Spoiler
stone; [netherrack>10 + magma_block>2 + nether_quartz_ore>1],
short_grass; [nether_sprouts>1],
cobblestone; [blackstone>1],
grass_block; [crimson_nylium>1],
dirt; [netherrack>1],
coarse_dirt; [soul_soil>1],
sand; [soul_sand>1 + soul_soil>1],
red_sand; [soul_soil>1 + soul_sand>1],
sandstone; [blackstone>1],
cut_sandstone; [polished_blackstone>1],
chiseled_sandstone; [chiseled_polished_blackstone>1],
smooth_sandstone; [basalt>1],
smooth_red_sandstone; [basalt>1],
gravel; [soul_soil>1],
stone_bricks; [nether_bricks>2 + red_nether_bricks>1],
sea_lantern; [glowstone>1],
farmland; [soul_sand>1],
wheat; [nether_wart>1],
gold_ore; [nether_gold_ore>1],
fern; [nether_sprouts>1],
oak_leaves; [nether_wart_block>1],
spruce_leaves; [nether_wart_block>1],
birch_leaves; [warped_wart_block>1],
jungle_leaves; [warped_wart_block>1],
acacia_leaves; [nether_wart_block>1],
dark_oak_leaves; [warped_wart_block>1],
oak_log; [crimson_stem>1],
spruce_log; [crimson_stem>1],
birch_log; [warped_stem>1],
jungle_log; [warped_stem>1],
acacia_log; [crimson_stem>1],
dark_oak_log; [warped_stem>1],
You can also spread blocks from other mods:
Example with Soulstone from Mystical Agriculture:

For modded blocks the format is [MODID:Blockname>weight]
(with old spread settings)





You may freely use this mod in any modpack, as long as the download remains hosted within the CurseForge or Modrinth ecosystem.
Serilum.com contains an overview and more information on all mods available.
For issues, ideas, suggestions or anything else there is the Github repo. Thanks!
常见问题
Nether Portal Spread 支持哪些 Minecraft 版本?
Nether Portal Spread 支持 Minecraft Java 版 1.12.2–26.3,共 40 个版本,可用的加载器:Fabric / Forge / NeoForge / Quilt。下载时注意选择和你游戏版本一致的文件。
Nether Portal Spread 怎么安装?
先用 PCL2 或 HMCL 启动器安装对应版本的 Fabric / Forge / NeoForge / Quilt,再把下载的 .jar 文件放进游戏目录的 mods 文件夹,重新启动游戏即可。开启了版本隔离的,mods 文件夹在 versions/版本名 下面。运行环境:仅服务端。
Serilum 的其他作品
查看全部 →Collective
🎓 Collective 是 Serilum 所有模组共用的前置库,包含通用代码。
Starter Kit
📦 为加入世界的新玩家提供可配置的初始装备、物品、药水效果、Curios 和 Trinkets 饰品槽位和/或命令。兼容 FTB Team Islands。
Villager Names
为所有村民实体添加默认名称或自定义名称,让世界更加生动。
Double Doors
🚪 多个相同的双开门、活板门和栅栏门可以同时打开。

评论
登录后评论和评分