Create: Track Covers

Tram rails for your Create towns.

Pave Create’s train tracks into the street, the way tram rails sit in a cobbled road. Use a block on a track and its bed is paved up to the rails, with a groove beside every rail. The wheels still run on the rails and never sink into the paving.

🛤️ Features

• 🧱 Any full, solid block paves a track: stone bricks, cobblestone, gravel, a grass block, planks, concrete, wool.
• 🚋 Flush with the rails: the paving ends level with the tops of the rails and leaves a groove beside each rail for the wheel flanges. Trains look right and run as before.
• ↔️ One click, three columns: one use paves the track and the columns beside it.
• 🔀 Curves, crossings and junctions are paved too. Rails laid through paving later cut their own grooves.
• 🏙️ Whole streets: use a block on the side of the paving to fill the next column, and pave a whole square flush with the rails.
• 🔧 Reversible: Create’s Wrench takes the paving off again, and you get the block back.
• 🚶 Walkable: you and every mob walk on paved track like on the street.
• 🎨 Shader friendly: paving is drawn as part of the terrain, so it works with Sodium, Iris and shaders.

🚀 How to use

1. Lay your track as usual. Only level track can be paved.
2. Hold a stack of the block you want. Each column of paving takes one block.
3. Right-click the track. The track and the column on each side of it are paved.
4. For a curve, right-click the curve itself: the whole curve is paved at once.
5. To pave the rest of the street, right-click the side of the paving with more blocks.

📦 Requirements

• Minecraft 1.21.1 with NeoForge
• Create 6.0.10 or newer (6.0.x)

🤝 Works with

• Create: Steam ‘n’ Rails: its wide and narrow gauges and its track styles are paved too.
• JEI: a page on every track that can be paved.

⚙️ Good to know

• There is no config.
• 🌍 In English and German.

Made for the Far Lands modpack. Works in any NeoForge 1.21.1 pack with Create.